Product	SX100
Description	Temperature Data Logger
Image
Features	The Dickson SX100 sets a new standard in affordable, accurate, and easy-to-use PC based recording. The SX100 is a self-contained, low cost, single channel temperature Data Logger. Its low cost makes it a great preventive mainenance tool. Building Managers place them through out their facilities constantly logging data so when a temperature issue does arise they already have the data to review. That issue may not arise for months but they are prepared today! Great for HACCP, SPC, and Quality Control as well. Ideal for accurate recording of temperature for quality control. Recorded temperature data is easly downloaded and intigrated into spreadsheets and documents Battery Operation - 1 Year battery life Stores 7,680 Sample Points Temperature Range -40 to +176°F (-40 to 80°C) Delayed Start Capability Faster Downloading User friendly DicksonWare software creates a graph of your data in seconds. DicksonWare features include complete customization of your graph, zooming, and viewing your data in tabular format. You can also view data from several loggers on a single graph enabling easy comparison of multiple sets of data. Transferring the data into documents or spreadsheets is a snap! Test a FREE software demo version -- see the software section of this site
Specifications	Temperature Range: -40 to +176°F (-40 to +80°C)(non-condensing) Internal Temperature Accuracy:±1.8°F(±1°C) over range 14 to 176°F (-10 to +80°C; ±3.6°F(±2°C) over range 14 to -40°F (-10 to -40°C) Temperature Sensor: Internal digital temperature sensor Ambient Operating Conditions: -40 to +176°F (-40 to +80°C); 0-95% RH non-condensing Power Source: 3V Lithium coin cell battery, approximately 1 year at 1 minute sampling (user replaceable) Power Status Indicator: LED - Flashes when sampling Data Capacity: 7,680 Sample Points Sample Interval: Variable from 10 seconds to 24 hours in 10 sec increments Calibration: User: None; Factory: Zero pt. Resolution: 0.9°F (0.5°F) Memory: Non-volatile (retains data even when battery is removed) Approvals: CE Enclosure: Polycarbonate Dimensions: 3.1" x 2.1" x 0.9" (79mm x 54mm x 22mm) Weight: 1.8 oz (49g) Response Time: 10 minutes to move 63% of full scale Note: A015 must accompany the initial purchase of the SX100 in order to operate A015 - DicksonWare & Download Cable Specifications PC Software Features: Windows™ based, variable sample interval, data wrap-around, viewing data, graphing and zooming Software: Microsoft 95, 98, 2000 and NT compatible PC Requirements: PC w/386 or better micro processor, 4M RAM, 1 free COM (Serial) port, CD drive Version Required (Minimum): 6.0.0.5 Cable Type/Length: 9 pin male D-shell to male 2.5mm sterio plug, 6 feet long Computer Interface: RS-232 COM (Serial) port